MPXM2053GS Board Mount Pressure Sensor: Datasheet, Applications
- Categories:News
- Author:
- Origin:
- Time of issue:2022-09-08 15:34
- Views:
(Summary description)MPXM2053GS Board Mount Pressure Sensor: Datasheet, Applications
MPXM2053GS Board Mount Pressure Sensor: Datasheet, Applications
(Summary description)MPXM2053GS Board Mount Pressure Sensor: Datasheet, Applications
- Categories:News
- Author:
- Origin:
- Time of issue:2022-09-08 15:34
- Views:
Description
The MPX2053 series devices are silicon piezoresistive pressure sensors that provide a highly accurate and linear voltage output directly proportional to the applied pressure. The sensor is a single monolithic silicon diaphragm with the strain gauge and a thin-film resistor network integrated on-chip. The chip is laser trimmed for precise span and offset calibration and temperature compensation.
Pin Configuration
Figure: Pin Configuration
Block Diagram
Figure: Block Diagram
Features
- Ratiometric to Supply Voltage
- Differential and Gauge Options
- Temperature Compensated over 0 °C to 85 °C
- Easy-to-Use Chip Carrier Package Options
Applications
- Level Indicators
- Medical Diagnostics
- Robotics
- Pressure Switching
- Pump/Motor Controllers
- Non-Invasive Blood Pressure Measurement
Datasheet
You can download the datasheet the link given below.
Specifications
TYPE | DESCRIPTION |
Mfr | NXP USA Inc. |
Series | MPXM2053 |
Package | Tube |
Product Status | Active |
Applications | Board Mount |
Pressure Type | Vented Gauge |
Operating Pressure | 7.25PSI (50kPa) |
Output Type | Wheatstone Bridge |
Output | 0 mV ~ 40 mV (10V) |
Accuracy | -0.6% ~ 0.4% |
Voltage - Supply | 10V ~ 16V |
Port Size | Male - 0.12" (2.97mm) Tube |
Port Style | Barbless |
Features | Temperature Compensated |
Termination Style | Gull Wing |
Maximum Pressure | 29.01PSI (200kPa) |
Operating Temperature | -40℃ ~ 125℃ |
Package / Case | 5-SMD Module, Top Port |
Supplier Device Package | 5-MPAK |
Manufacturer
NXP Semiconductors N.V. is a Netherlands-domiciled American semiconductor manufacturer with headquarters in Eindhoven, Netherlands that focuses in the automotive industry. The company employs approximately 31,000 people in more than 35 countries, including 11,200 engineers in 33 countries.
Using Warning
Note: Please check their parameters and pin configuration before replacing them in your circuit.
FAQ
What are the different types of board level pressure sensors?
The board level pressure sensors include gage, absolute, differential, and compound pressure types (ranging from 0-2 to 30 inches of water and 0-1 to 500 psi).
Where should a pressure sensor be placed?
As a general rule, pressure sensors should always be placed away from any turbulent air. Placement near windows or doors, and supply or exhaust vents should always be avoided.
What is the difference between a pressure switch and a pressure sensor?
Pressure switches are used in systems to ensure the safety of the machine and its operators while sensors simply relay a pressure readout to a remote location.
HOT
Request a Quotation
Call us 24/7 or submit the form to speak with one of our electronics recycling specialists.
Contact Information
Room 807, 808, 809 and Room 3913, Duhuixuan Building, No. 3018, Shennan Central Road, Futian District, Shenzhen City,Guangdong Province,China
Subscribe
Subscribe by e-mail today and get notifications about new services, industry news and special offers!